Waldorf Crema review: the classic Streichfett sound on new multi-synthesis paths

SYNTH ANATOMY uses affiliation & partner programs (big red buttons) to finance a part of the activity. If you use these, you support the website. Thanks!    Reading Time: 12 minutes

Review: Waldorf Crema reimagines the classic Streichfett string synth into a multi-engine Synthesizer, combining vintage warmth with broader sonic possibilities.

An espresso topped with plenty of crema—stir it in and savor the moment; for many, it’s pure delight. If you call out for a “Crema” in Remagen—a German town of over 18,000 inhabitants—you might get lush string textures and dense pad sounds on your table.

Waldorf, which calls this place home, has introduced Crema, a new Synthesizer focused on strings and pads, powered by a multi-engine synth with familiar and new ingredients

Waldorf Crema

Index 

Waldorf Crema review

Waldorf Crema review summary 

Pro

  • Streichfett sound is back! 
  • Expanded multi-engine (wavetable, FM) 
  • More than a pad & string synth
  • Sound quality with a lot of lushness and nostalgic charm
  • Flexible sound routing (layering, splitting, arpeggiator and sequencer) 
  • quality FXs 
  • An instrument for musicians and less for hardcore sound designers

Neutral 

  • A much simpler menu, but still a good amount of clicking and turning involved
  • MIDI mapping available but no fixed MIDI mappings

Contra

  • Some strange hardware interface and menu labeling (missing FX 2, second layer FX…) 
  • No sound editor yet, but a librarian
  • Little audio fragments after fading out the sound (issue related to the shimmer FX confirmed by Rolf – will be ironed out) 

Unboxing

The synth comes in a fairly compact, plain cardboard box with its name on it. Inside, you’ll find the Crema, two Waldorf-branded mini-to-DIN MIDI adapters, two USB-C cables, a noise isolator, and a quick-start manual.

It’s a very compact instrument, measuring 252 x 170 x 48 mm. It’s well-made, with a metal front panel, and feels substantial at 0.9 kg—not like the plastic box some might fear.

Waldorf Crema review unboxing

The knobs feel great, with just the right amount of resistance, and are easy to operate.  The cream/beige casing reminds me a bit of a cozy German couple’s living room from the 90s or 2000s. The buttered bread served there, especially in the evenings, might suit the synth DNA, too.

Yes, it also includes a printed quick-start manual with everything you need to start exploring your Crema. It’s positive that it comes in paper form.

Connectivity 

Crema offers stereo connectivity through two 6.3 mm TS mono jacks. An integrated circuit also enables TS mono or TRS stereo operation on a single channel—handy if you only have a stereo cable. 

Next to this is a 3.5mm headphone socket, a USB-C port for power and data (MIDI, firmware updates), a dedicated power switch, and MIDI in and out on TRS minijacks.

Connectivity

USB-C power isn’t always the best choice because it’s susceptible to interference noise. In my test, I heard no noise and didn’t need the included isolator. So, I’ll add another isolator to my collection for another synth that doesn’t handle unwanted noise well.

Interface and vs Protein

Let’s take a closer look at the interface. Yes, the Crema and Protein look very similar. They share the same hardware platform, so they operate on a very similar concept.

Waldorf Crema packs a solid number of knobs into a very manageable user interface: 3 cream-colored knobs, 6 white ones, and the rest in black. Same housing; only the interface layout and internal engine differ.

Crema vs Protein

Nothing has been changed regarding the OLED display. It is just as small—though acceptable for its size—as it is on its blue counterpart. 

The right side of the interface is laid out almost identically. The display is also positioned in the same place. By contrast, the left side has a completely different structure. 

The interface is structured into three main areas: texture, lines, and effect – shimmer, reverb. Not all knobs have dual functions, as with the Protein synth. These secondary functions are labeled in “crema” color and are accessible with the Shift key.

You can also control the parameters via MIDI CC. However, the synth has no fixed MIDI CC assignments. Instead, you can map parameters to CC values ​​using a dedicated function. It’s a bit strange not to offer a fixed MIDI map. 

Operation

If you recall my review of the Waldorf Protein, you may remember that I wasn’t entirely happy with its user interface. Although its 21 knobs give you plenty of control, you still have to do quite a lot of menu-diving with shift functions and scrolling.

The good news is that the Crema requires significantly less menu-diving. This is partly because the engine is designed to be simpler and has additional knobs and buttons for specific menu functions. The menu structure is also pretty flat here. 

Operation

When you select a submenu, you can simply scroll downward using the white data encoder—it’s very straightforward. There are no separate pages; you just scroll down.

Settings and Arp/Sequencer menus are laid out left to right and are very straightforward and flat. The only thing that’s a bit annoying is how you edit and select a preset. If you edit a patch, the UI automatically jumps to the “Edit” buttons.

You can’t select a new sound here, so you have to press the “Preset” button again to open the preset browser. Furthermore, you have to confirm your preset selection by pressing the knob. A smoother, more streamlined workflow would be preferable here.

Streichfett on steroids

The new Waldorf Crema is a bi-timbral, polyphonic string-and-pad Synthesizer. String and pad synth—that rings a bell, doesn’t it?

Right, the Streichfett, which Waldorf unveiled at Musikmesse in 2014 and released later that year. Until now, it’s been their charming little digital string machine. Now it’s being retired, with the “Crema Ensemble”—its full name—taking its place.

Streichfett DNA

But it’s not over yet. The entire essence of Streichfett lives on in Crema. The new “creamy” engine builds on that popular pink synth, retaining its vintage string-machine DNA and expanding it with the digital pads of the 1980s and 1990s.

The Crema core consists of two independent layers, each with its own engine, flexible routing, and effects: Texture and Lines.

Stack and split options allow you to configure your sound with great flexibility. You can set the split point simply by pressing a key on the keyboard.

Split sounds

I particularly like that you can route the built-in arpeggiator/sequencer quickly and easily – either to both sounds or just one. This lets you play a pad sound with an arpeggiator or sequencer running underneath it that stays in the key of your pad sound.

Splits and layers are accounted for within the patch and saved along with all sound parameters. The same applies to the arpeggiator and sequencer. You can also route each layer to a different FX.

Texture Layer  – The Streichfett Renaissance

The Texture layer is based on a multi-engine system comprising various synthesis types. You can choose from 24 available engines across three synthesis concepts: strings, wavetables, and FM, controlled via macros: type, variation, animation, and depth. 

It’s not a super “deep dive” like the engine found in the Protein—it’s simpler. The “Details” and “Mods” allow access to deeper parameters within each engine.

Texture Layer

At the forefront is a recreation of the Streichfett engine, featuring everything we loved about it. You can play with its full original 128-voice polyphony. 

With the creamy Variation knob, you can smoothly sweep between registers: violin, viola, cello, brass, organ, and choir.  Pick the Animate knob and set the registers in motion.

It’s built around an adjustable LFO that modulates it, letting you create beautifully evolving, hybrid string machine sounds. Streichfett’s vibrato and phaser effects are also onboard but hidden behind the mod button.

Since I’ve never owned a Streichfett, only the plugin/version, I can only comment on that. I don’t hear any significant differences. Crema’s engine is on the same level, if not better. Streichfett lives on, just in a different form! 

No Wavetables, No Deal!

Right next to the new and old Streichfett, sits a 12-voice wavetable engine. Yes, wavetables; it’s hard to imagine a Waldorf product without wavetables. 

17 different tables are available, and you can travel through them with the Variation knob: poly saw, square, organ (1-3), resonant, mallet, bellish, add harm… and more. You can also animate the position (Variation) with a multi-wave LFO. 

wavetables

Pressing the “Mods” buttons reveals a small yet sophisticated wavetable engine, featuring a wave envelope, vibrato effects, and a resonant filter with its own dedicated envelope and LFO.

While the Streichfett lets you immerse yourself in warm, cozy string machine sounds, you can also lose yourself in colder, harmonically rich textures. Static and evolving, you get musical results fast.

On a large wavetable synth, you might spend a long time; here, you can have a pad or texture ready to go in just about five minutes. It’s like a middle ground between the simplicity of a rompler and the depth of a full-fledged synth.

Cold FM and The Final Nostalgic Touch

Need brighter, harsher sounds? Crema has you covered. Next, explore the 12-voice 4-operator FM engine, which, according to Waldorf chief developer Rolf Wöhrmann, draws on elements of the modular Kernal FM engine found in the Quantum/Iridium.

It includes six macro-style FM types: bells, keys… Animate increases the amount of FM. With subtle settings, you add character, and at max, you envelop your sounds in an overdose of harmonics. The Mods menu hides adjustable FM feedback and vibrato.

Waldorf Crema review Texture FM

The Texture layer also features an interface-programmable full ADSR envelope, which Protein lacks. This overcomes Waldorf’s Cream’s limitations as a string machine/pad synth, opening the door to bass and lead sounds that are just as impressive.

All these engines can then be tucked into a warm, cozy blanket called the “Ensemble” effect, carried over from the OG Streichfett. Try three modes: strings (string machine ensemble), chorus, and a combination of both (strings + chorus).

I’m classic, and I prefer the Ensemble FX without any extras. It perfectly conveys the feeling that multiple string players are bowing slightly out of sync. With the chorus, you get extra cream on top. The white knob next to it gives you volume control and pan for the texture layer.

Waldorf Crema review Lines

Lines layer – supportive to punchy

Just a step further, the second layer of the Waldorf Crema is Lines: an 8-voice polyphonic VA Synthesizer based on the Streichfett’s solo engine. Shapeable saw or pulse waveforms form the foundation and can be detuned in cents and up to octave shifts.

Along with detuning, the variation knob also offers PWM control, tremolo, and vibrato that you can use all at once – nice. This section is also more than just a support for the texture engine. 

The snappy AR envelope, with trigger and sustain modes, lets you create punchy, analog-style basses or leads that cut through. I’m somewhat surprised by how rich and fat this VA engine sounds. The sounds it produces without layer 1 are really enjoyable.

Lines doesn’t have a distinct FX section like the Texture layer, but it does have a volume knob with a pan option.

Effects

One Multi-FX Engine In Waldorf Crema?!

Two layers, two independent sounds. These are routed through a three-stage FX section. The routing is very flexible. You can route in series or parallel, and per layer you can choose to use both FX, just the second one, or the direct output without shaping. 

There are two distinct FX engines: FX 1 and FX 2. At first, this concept was a little confusing. The three FX sections labeled on the hardware might make it seem like there are three FXs. In reality, there are two FX engines, where one occupies two sections.

Better labels in this section would make it more logical. The same applies to the menu structure. Neither the shimmer nor the reverb has “FX 2” prefixed to them, which makes it a bit confusing at first. Administrative tasks completed; now for the fun.

Waldorf Crema review FX

FX 1 is a multi-effects processor with 14 different algorithms: 3 chorus, 3 flanger, 3 phaser, tremolo, drive, and 3 delay. I’ve noticed that switching between effects isn’t smooth; there’s an audible click. Perhaps this could be improved in a future update.

Only one effect can be active at a time, adjusted with the Control and Amount knobs. Less obvious is a second control layer beneath them, accessible by pressing Shift. The interface doesn’t label this layer, which is strange.

The effects are high-quality and complement the sounds well. They cover everything from refinement to heavy shaping, including the built-in distortion. Modulation is not possible. 

Shimmer Reverb With A Twist 

FX 2 features a fully tweakable shimmer reverb, with a pitch shifter that shapes the reverb tail in different ways. Its standout feature is a second built-in pitch shifter that takes the concept further, creating richer, thicker textures.

One pitch shifter is probably enough to make most patches sound dreamy. But with two, you can create almost-singing harmonies that drift away like veils. Remember to press Shift to access the extra features; neither the interface nor the menu indicates this.

FX 2

I’m not usually a fan of shimmer reverbs because they’re overused these days, but here it works really well with the strings and textures. Also, it doesn’t overpower the sound unless you force it to.

Waldorf’s new little gem from its recent synths is also included: the Vintage eeeh Flavor knob. It infuses micro-variations into the sound, mainly pitch variations in both engines. This makes the synth sound a bit more organic.

However, as with the Protein, I rarely noticed any effect. The effect is very subtle, even at higher settings.

Arpeggiator / Sequencer

As noted earlier, both arpeggiator and sequencer are available for both layers together or routable to a single one, which is a very useful feature. So you can pair a Streichfett string machine pad full of nostalgia with an arpeggiator/sequencer that triggers the Lines layer. 

The first offers everything you expect from a modern arpeggiator: various playback directions, up to 4 octaves, 16 selectable patterns, swing, and more. However, it requires a bit more scrolling and clicking. The same applies to the sequencer.

Arpeggiator sequencer

It supports real-time recording with up to 32 steps, 16 built-in patterns, swing and gate control, and scale awareness. Tangerine Dream or Berlin School fans, hold on tight—unfortunately, it has no onboard “ratcheting”.

Two great features that open up a lot of creative possibilities, even though they involve a fair bit of clicking and turning the white data encoder. Btw: both also send out MIDI.

Sound Design

In terms of sound, the Crema far surpasses the original Streichfett. Whereas the Streichfett focused mainly on pads and strings, Waldorf’s Cremissimo creates sophisticated hybrid sounds, from arpeggios layered over string textures to FM basses and gritty digital wavetable pads.

The Streichfett engine is a “sweet spot” machine. Put on your colored glasses, turn on the ensemble, and you’re ready for a trip back to the 70s/80s. Different with the new wavetable and FM engines.

They are less “sweet spotish”. You need to twist the knob a bit longer before you get the desired result. Once you’ve got that dialed in, it provides a great counterpoint to the warm strings.

Because the engine is stripped back, you can quickly get to great, usable sounds without having deep synthesis knowledge. Layering works like a charm. For an immediate rocket start, Waldorf ships Crema with over 130 factory presets. 

They cover everything from warm, nostalgic string machines, gritty digital soundscapes, and textures, to punchy basses, keys, and leads. A lovely sonic tour of what you can do with Crema.

Patch Management

360 preset slots are available for creating and saving custom sounds. Patch management has improved massively compared to my Protein review. The free Chutney librarian software is now available, simplifying patch organization.

Sound import and export are available, but you still can’t edit sounds from a computer. According to Waldorf, an editor is on the roadmap, but they haven’t provided a timeline.

Other features worth mentioning include MPE, velocity, aftertouch, and sustain support for each part. Furthermore, each part can also be triggered separately via MIDI.

Waldorf Crema review conclusion

Streichfett has evolved into Crema, a desktop synthesizer that preserves the original’s vintage string-and-pad character while exploring new territory with an expanded sonic palette.

Its new multi-engine architecture makes it a more versatile synth, spanning three decades of sound. It still delivers Streichfett’s lush, warm, almost kitschy vintage tones, while also capturing the grit and grain of early digital synthesis with FM and wavetables.

It takes the immediacy of a string machine and packs it into a more colorful traditional synth, encouraging you to play—rather than getting bogged down in a long list of features.

Waldorf Crema is a charming, niche, all-purpose Synthesizer that adds retro vibes to any hardware-only or hybrid setup.

Is everything perfect? Not quite—there are a few minor shortcomings. But Crema delivers a unique package: an affordable dose of retro lushness that sounds fabulous and is a joy to play.

Waldorf Crema is now available for 345,45€ (including German VAT) through its official distributors.

More information here: Waldorf Music 

Available from my partners

Thomann

Hardware Reviews

14 Comments

  1. Congratulations 🥳🥳 Orphan called it 🏅🏅

    Although I’d give some credit to Wolf H for “caffeine”, because the first crema I thought of was on top of espresso.
    I also think the color is more like coffee than cream.

    And look at me. Having said that this probably wouldn’t interest me, I am now interested.
    I’m in the market for a string thing.

  2. Oh, I guess it is crema like espresso?
    I thought it was cream, as a reference to fat/fett.
    Maybe it’s both, as I know the Germanic peoples are fond of dull puns.
    (I don’t mean dull in a disparaging way.)

    In that case, Orphan and Wolf H have a joint victory, according to the international regulations.

  3. The price is right, it has full ADSR controls and the UI seems to have a very logical “macro” oriented flow for instant sound generation. My GAS sensors are tingling!

  4. I love my square string box, but no velocity was always painful ..
    thanks for the review.
    The Crema will probably be sitting soon on my desk.

  5. Nice. I guessed pretty much every other possibility when looking back this was a rather obvious thing. But, I didn’t guess and it looks great – I’m a sucker for those beige colours and they’ve added some useful features. A little wavetables as well, I think it’s a great second in the range.

  6. Hi! Thanks for the great review!

    I have a question about the Crema. On the Waldorf Protein, pressing SHIFT while holding PLAY activates a HOLD function, allowing notes to sustain without keeping the button pressed.

    Does the Crema have the same function?

    I’d really appreciate it if you could test this. Thanks!

Leave a Reply

Your email address will not be published.


*