UDO Audio DMNO ON: the hybrid synth gets a desktop unit with the ON System

SYNTH ANATOMY uses affiliation & partner programs (big red buttons) to finance a part of the activity. If you use these, you support the website. Thanks!    Reading Time: 4 minutes

UDO Audio DMNO ON is the desktop version of its dual-layer DMNO hybrid Synthesizer, expandable in controls with the ON System.

A year ago, George Hearn of UDO Audio unveiled the DMNO hybrid dual-layer Synthesizer at the Machina Bristronica event with little fanfare. Delivery began to customers at the start of the year.

Just as surprising as last year’s news: UDO Audio has now released the DMNO ON—the desktop version, but with an extra control twist.

UDO Audio DMNO ON

UDO Audio DMNO ON

The DMNO ON is the desktop/module version of the DMNO Synthesizer. At its core, the desktop synth is identical to the keyboard version.

Behind the interface and layout with its lovely electroluminescent glass vacuum fluorescent display (VFD)—heavily inspired by the Oberheim SEM—lies no replica of Tom Oberheim’s legendary analog synth but a powerful bi-timbral synth.

DMNO ON features the same 2-part, multi-timbral, 8-voice hybrid binaural Synthesizer engine as the keyboard. With one big difference, however! You can only control one layer from its user interface. The keyboard has controls for both.

The DMNO Engine

You get two fully-featured independent synths. Each synth is driven by two ultra-high-sample-rate, high-resolution, FPGA-powered digital oscillators with classic waveforms and the best-known DDS waveforms. 

The oscillators are tweakable with controls for tuning, PWM, and sync. A dedicated oscillator mod section gives you various ways to create more complex sounds: modulating the detune, wave/PWM, and pitch mod of one or two oscillators.

UDO Audio DMNO ON

Then, a mixer with built-in Q-drive adds extra juice. From here, it goes into a versatile stereo analog filter that uses a novel, reconfigurable voltage-controlled topology.

Series, parallel, or stereo configurations are available, along with a wealth of filter modes ranging from classics to more experimental options. The stereo filter on each side is fully tweakable

For motion, each layer houses a main multi-wave LFO with rate and delay parameters. A second global LFO is available on the left side, close to the joystick. Furthermore, you have per-layer two-loopable ADS envelopes with an option for a third.

A 32-bit DSP digital multi-FX processor chain, featuring delay, reverb, EQ, overdrive, distortion, and chorus, complements the hybrid engine. 

UDO Audio DMNO ON

On the connection side, it has an input for the internal power supply, a USB port for MIDI and audio, a full 5-pin MIDI interface, and three expression pedal inputs (volume, expression, and single/double). 

It also offers CV/gate connectivity, a main mix out, an auxiliary out, and a phone socket.

Playbility

The DMNO keyboard synth not only strongly resembles the Oberheim 2-Voice but also inherits its voice-combination capabilities and even levels them up. The UDO Audio DMNO also offers this.

A unique play mode system allows you to instantly reconfigure the internal architecture at the touch of a single control. 8 different modes are onboard that refine how the two timbres interact.

ON System

This includes traditional splits and layers, alongside other creative and unexpected configurations, such as random and chaotic arrangements. 

Also onboard is a 64-step sequencer with creative features, and a multi-mode arpeggiator featuring smart hold functionality.

The ON Twist

As you may have noticed, the DMNO ON lacks a full parameter panel for the second layer and the effects—parameters you can otherwise access via a second UI layer.

However, for those who want hardware control, UDO Audio developed the ON System. These bus-powered standalone controllers connect via a robust, screw-locking D-Sub cable and give the DMNO ON the missing parameters. 

ON System

There will be two controls. The ONM-1 Synth Control gives you a second synth control set to your DMNO ON base unit, giving you hands-on control of the second layer like on the keyboard version.

And the second is the ONM-2 Effects Control, another controller that offers all the missing effects parameters, including an extra screen. You can combine these freely.

 

 

 

UDO Audio DMNO ON First Impression

At first, I thought the DMNO was just another Super synth. Demos quickly revealed it to be a much more aggressive beast.
Compared to other UDO synths, this is the one I like best for the user interface and sound capabilities.

I’m pleased to see that DMNO is getting a desktop version with DMNO ON. It’s a shame the entire interface didn’t fit the desktop format, but they found a clever solution that accommodates different workflows.

UDO Audio DMNO ON price and availability are TBA.

More information here: UDO Audio 

Hardware Synthesizer News

13 Comments

  1. What a nice piece of kit. Played it at SynthFest France last year and it does stand out in many respects. Any idea of the Arp & MPE roadmap though?

    From SoundOnSound on their article from last August26:
    “The front‑panel button that accesses the arpeggiator is labelled ‘ARP/SEQ’. At the time of writing there is no sequencer, but UDO say it’s planned for a future update, hopefully later this year. They also say that the promised MPE compatibility will be along soon as well, potentially in the same update.”

    • don’t hold your breath on the pending features, the Super Gemini still lacks MPE even though it’s advertised and printed on the panel.

      I like the base unit but that modular controller system I believe will fail commercially unless the newer models provide something very unique.

      • well I’d say if they release a new synth before this feature is out, don’t hold your breath. Super 6 still doesn’t have built it polychain support either. But maybe since there’s a button for it, they’ll hold themselves a little more accountable for their promises.

  2. Osciladores digitales de alta resolución y frecuencia de muestreo ultra alta, basados ​​en FPGA, bitimbrico, todo tipo de FX, 2 salidas L/R y otras dos salidas AUX L/R… ¿por qué me resulta tan familiar? esas características son las mismas que el Novation Peak/Summit y ademas son de UK. Mismo perro pero con distinto collar.

    • “High-resolution, ultra-high sample rate digital oscillators based on FPGA, bi-timbral, all kinds of FX, L/R main outputs plus L/R AUX outputs… why does this seem so familiar? Those specs are the same as the Novation Peak/Summit, and they’re from the UK, too. Same dog, different collar.”

      Thanks for writing in English in future so everyone can understand you. Same technology but a different synth and engine.

    • High-resolution, ultra-high sampling rate digital oscillators, FPGA-based, bitimbral, all kinds of FX, 2 L/R outputs and two additional L/R AUX outputs… why does this sound so familiar? These are the same features as the Novation Peak/Summit, and they’re from the UK, too. Same dog, different collar.

  3. Here are the prices for France (including 20.6% VAT):

    – UDO Audio DMNO ON: 2399 €
    – UDO Audio DMNO ONM-1: €759 €

    I find this expensive, compared to the price of the keyboard version (which includes a 44-key Fatar keyboard and the equivalent of two ONM-1) which is 2899 €.

    • and in the USA:

      – UDO Audio DMNO ON: $2,850
      – UDO Audio DMNO ONM-1: $875

      Together that’s $3,725 for the controls to equal the keyboard controls and they keyboard is selling for $3,500.

      Honestly it doesn’t make any sense to me unless you really want the hardware and effects controls that are forthcoming and those are both $875. That just doesn’t make sense to me.

  4. I wonder how a small company like Manfred Fricke Berlin managed to implement all these controls on the surface of my MFB Synth Pro – a true analog synth by the way – for more than half of the DMNO ON price. Must have been wizards.

  5. This has gotta be the most overrated synth to come out in a while. I agree with the above poster, the Summit gives you much more to work with, more voices, fully mature firmware, and you can find them ~$1600 used. It’s probably more competitive in Europe where they don’t have the effects of the tariffs, but I can’t understand how anyone could justify $3500 or however much for the module for a synth with this architecture when the Summit exists.

  6. Why pay a premium for a UDO synthesizer that, under the hood, is built exactly like any Behringer product? It essentially uses the same machine-assembled, surface-mount (SMD) circuitry, the only difference is an eye-catching, Instagram-ready enclosure, there is no human abour, such as the manual selection and soldering of transistors. This model evokes the design of the SEM, while previous ones referenced the Jupiter, these are merely lures, ploys designed solely to drive sales. I don’t understand why synth enthusiasts, before shelling out large sums of money, don’t take a closer look at what’s “under the hood”, that is where the *real* value lies. If a synthesizer isn’t built using premium through-hole components and hand-selected transistors, it shouldn’t cost any more than a Behringer product; otherwise, you’re being thoroughly ripped off.

Leave a Reply

Your email address will not be published.


*