Make Noise has released the 208hp 7U Eurorack case with a multi-zone power system and an integrated CV bus.
A new Eurorack case can mark the start of a colorful journey into modular synthesis. It can also expand an existing setup or serve as the basis for a live rig.
Make Noise has updated its case lineup with the 208hp 7U model, which performs well in any of the scenarios above.
Make Noise 208hp 7U
The new Make Noise release is a 208hp 7U modular case designed for your modules, patch cables, and inspiration. It features powder-coated metal construction with new black anodized tapped strips instead of mounting rails. Yes, bye-bye to the sliding-nut design from the previous version.
It comes in a sleek matte black finish that matches the line of Black & Gold modules. Of course, you can use other Eurorack modules.
They say that it looks great with just about any module installed. The lid is also now removable and can be closed with the system fully patched.
A highlight of the new 208hp 7U case is the 4-zone power system, which acts like multiple independent power supplies in a single case. This design lets you isolate noisy modules from noise-sensitive ones.
Each zone features isolated +12 VDC and -12VDC supplies and a dedicated ground return path. Included are 31 power-shrouded connectors to help prevent incorrect installation.
The total available power available is +12VDC @ 4A, -12VDC @ 2.4A, and +5VDC @ 1A.
The CV Bus
Another highlight of the Make Noise 208hp 7U is the CV Bus, more than just a big multiple in the middle of the case. The CV Big Bus evolves the original CV Bus design from 2013 for Alessandro Cortini’s personal Make Noise system.
To accommodate the increased modulation density of the New Universal Synthesizer System (NUSS), the CV Big Bus doubles the channel count from 4 to 8.
These eight channels are distributed across the center of the system, allowing for quick, clean, and intuitive patching. Nice: the numerical indicators illuminate, providing visual indication of channel number, level, rate, and polarity for up to eight signals shared throughout a patch.
Important: it doesn’t work like a typical multiple because the control signals appear beneath their potential destinations, resulting in less cable mess. The color coding and visual indication make navigating complex patches easier and more intuitive
The CV Bus can share essential patch signals like clock, modulation, sequence, and audio, but it can also carry any signal the system creates. It’s basically a hub for your signals.
Without it, you’d need extra modules—meaning fewer exciting modules in your rack, or a larger case. It saves you from needing specific routing modules.
In case you already have a case with a CV bus, you can buy the CV Big Bus as a standalone replacement for any CV Bus.
Modular To Line Interface
It also includes a high-quality stereo line driver that converts modular synth signal levels to the commonly used line level. It includes mini-jack inputs for Left (Mono) and Right (Stereo), a single master volume control, and a stereo line output pair. The left output doubles as a TRS ⅛” headphone output
The left output doubles as a TRS ⅛” headphone output. These outputs are capable of driving a long cable out to a PA System or a set of Headphones. They are AC-coupled with a built-in limiting circuit (with visual indication) that prevents damage to ears and PA system when the patching gets experimental.
This way, you save yourself the audio interface module that converts modular audio to line level.
Make Noise 208hp 7U First Impression
A lovely Eurorack case that offers many features you would otherwise have to buy separately as individual modules. It’s somewhat pricey, but it offers more than just housing and power.
Make Noise 208hp 7U case is available now for $949/1099€.
More information here: Make Noise
Available from my partners
Thomann




Be the first to comment